这里是标题一h1占位文字

Bionoon 系列氮吹仪是采用微电脑处理和 PID 控制方式结合而形成的高精度温度控制仪器 , 其工作原理是将氮气快速、连续、可控地吹到加热样品表面，根据被浓缩溶剂的蒸发速度和沸点，设定加热温度，实现大量样品的快速浓缩。本仪器采用铝加热模块，其传热性好、传热均匀，这利于快速加热和快速温控。将氮气吹到样品表面，实现液体样品的无氧浓缩.

Bionoon series nitrogen blowing instrument is a high-precision temperature control instrument formed by the combination of microcomputer processing and PID control mode. Its working principle is to blow nitrogen gas to the surface of the heated sample quickly, continuously and controllably, according to the evaporation speed of the concentrated solvent and Boiling point, set the heating temperature to achieve rapid concentration of a large number of samples. The instrument uses an aluminum heating module, which has good heat transfer and uniform heat transfer, can achieve rapid heating and rapid temperature control. Nitrogen is blown onto the surface of the sample to achieve anaerobic concentration of liquid samples

Bionoon-12DC 氮吹仪

Bionoon-12DC nitrogen blowing instrument

1.温度范围：室温 +5℃ ~150℃  Temperature range: room temperature +5°C ~150°C
2.升温时间：≤ 30min （从 20℃升至 150℃ )  Heating time: ≤ 30min (from 20°C to 150°C) 
3.温度稳定性 @40℃：±0.3℃ Temperature stability @40°C: ±0.3°C
4.温度稳定性 @100℃：±0.5℃Temperature stability @100°C: ±0.5°C
5.温度稳定性 @120℃：±1℃ Temperature stability @120°C : ±1°C
6.放置模块数量：1 块  Place the number of modules: 1 block
7.定时时间设置：0~99h59min Timing time setting: 0~99h59min 
8.氮气流量：0~10L/min Nitrogen flow: 0~10L/min
9.氮气压力：≤ 0.5MPa  Nitrogen pressure: ≤ 0.5MPa
10.材质：所有部件均为实验室级，可耐受有机溶剂或选择抗酸性涂层型，抗腐蚀 

Material: All parts are laboratory grade, that can withstand organic solvents or choose acid resistance Coating type, which is anti-corrosion 
11.模块型号选择：请参考官网介绍 Module model selection: please refer to the official website introduction

Bionoon-24DC 氮吹仪

Bionoon-24DC Nitrogen Blowing Apparatus

1.温度范围：室温 +5℃ ~150℃  Temperature range: room temperature +5°C ~150°C
2.升温时间：≤ 30min （从 20℃升至 150℃ )  Heating time: ≤ 30min (from 20°C to 150°C) 
3.温度稳定性 @40℃：±0.3℃ Temperature stability @40°C: ±0.3°C
4.温度稳定性 @100℃：±0.5℃ Temperature stability @100°C: ±0.5°C
5.温度稳定性 @120℃：±1℃ Temperature stability @120°C : ±1°C
6.放置模块数量：2 块  Place the number of modules: 2 
7.定时时间设置：0~99h59min Timing time setting: 0~99h59min 
8.氮气流量：0~10L/min Nitrogen flow: 0~10L/min
9.氮气压力：≤ 0.5MPa  Nitrogen pressure: ≤ 0.5MPa 
10.材质：所有部件均为实验室级，可耐受有机溶剂或选择抗酸性涂层型，抗腐蚀 ;

Material: All parts are laboratory grade, that can withstand organic solvents or choose acid resistance Coating type, which is anti-corrosion
11.模块型号选择：请参考官网介绍 module model selection: please refer to the official website introduction

产品特色  Feature of product

1.气针相互独立，不会引起交叉污染。

The gas needles are independent of each other and will not cause cross contamination.  
2.每个气针流量大小可单独调整。 

 The flow rate of each air needle can be adjusted individually. 
3.各吹管通道可组合使用或单独使用。 

Each blowpipe channel can be used in combination or alone. 
4.每个气针流量调节阀和模块孔位垂直对应，调整直观、方便。

Each air needle flow regulating valve is vertically corresponding to the hole position of the module, so that the adjustment is intuitive and convenient.

5.系统控温精度高、控温范围广、温度校准方便。 

The system has high temperature control precision, wide temperature control range and convenient temperature calibration. 
6.升降机构有安全保护装置，使用安全。 

The lifting mechanism has a safety protection device, which is safe to use. 
7.升降机构带刻度显示，定位准确明了。

The lifting mechanism has a scale display, and the positioning is accurate and clear.